Product name : Photovoltaic junction box (non-filling)

Product model :ZS-BOX08-ab

Main technical characteristics:

1 Maximum system voltage: DC1500V

2 Maximum working voltage: 100V

3 rated pulse voltage: 16000V

4 Current Rating: 12A

5 Pollution degree: 2

6 Ambient temperature: -40°C~85°C

7 Protection level: Class II

8 Cable specifications: 4mm 2

9 Protection level: IP68

10 TUV certification standard: IEC 62790

11 Connector: ZS-CC01, certified by TUV 1500V according to IEC 62852

Steps for usage:

1 Make a ring of adhesive along the groove on the bottom of the case (black line shown below).

2 Route the busbar through the 4 threading holes on the bottom of the junction box and the junction box onto the component backplane.

3 Weld the busbar and the terminal of the junction box terminal firmly. The welded busbar should be pressed down as much as possible to avoid touching the cover. Note: The 4 reflow zones are not accessible to each other.

4 Close the cover (4 clips at the front, rear, left and right).

5 If you need to open the cover, use a word to force the four clamps.