Product name : Photovoltaic cable connector

Product model: ZS-CC01

Main technical features:

2 constant voltage: DC1500V

2 rated current: 30A

3 cable specifications: core 4mm 2, cable outer diameter 6.2mm ± 0.15mm

4 ambient temperature: -40 ° C ~ 85 ° C

5 protection level: IP68

6 overvoltage category: III

7 pollution level: 2

8 certification standard: IEC 60852: 2014

Steps for usage:

1 Use a special tool or device to rive the bushing plug to the cable. After riveting, the connection force must be 310N or more.

2 Insert the cable that has been riveted into the bushing and plug into the connector (the plug is inserted into the negative pole and the bushing is inserted into the positive pole), and you will hear a click when it clicks into place. Inspection method: After inserting it, pull it out with a force of about 10N, and pull it off, then the card will be in place.

3 Tighten the nut with a special tool and tighten it to no gap. It cannot be unscrewed by hand.

4 When wiring, just insert the positive and negative poles, and when the card is in the position, it will make a “click” sound.